Monday, July 18, 2011

Air supports masonry?

Air is one of the lightest materials, whereas masonry is one of the densest.   It seems improbable that air can be effectively used to support and enforce masonry.  But that’s what I’m looking at today.
A number of innovative approaches to using air as a structural support member have been developed and introduced over the past decade or so.  Some of the most intriguing of these applications involve bridges.

For example, textile composites are used as a framework for inflatable structures.  As discussed here, these inflatable elements are used to provide arches in a concrete bridge.  The arches are made of a membrane inflated with air which serves as a support form or scaffolding while the concrete bridge is constructed.   This approach means that no rebar is necessary; no wooden formwork or other difficult, expensive scaffolding material is required.  The inflated tubes shown above are treated with resin and solidified, then filled with concrete.  These cast curved tubes (or toroidal sections) of concrete are especially ductile, yet very strong.
A number of approaches have been used to provide high-strength inflatable bridges, such as those shown below:



There is an elegant simplicity to using an inflatable element as scaffolding for massive masonry structures.    An inflated surface, or bubble, represents a least energy surface.  There is a balance between the force of the inflated –or pressurized- air, and the tensile strength of the membrane, or “bubble”.  This balance results in a least energy surface.

The simplest of these surfaces is a simple round sphere.  These surfaces can also be tubes, cylinders, and combinations of these elements.  As we look at more complex shapes, we quickly enter the mathematician’s and geometer’s realm of topography.  There are saddle shapes, ‘monkey saddles,” parabolic and hyperbolic curves, even catenary configurations.  Each of these represents a least energy surface.


I am currently experimenting with an inflatable bladder to be used as scaffolding for constructing a masonry sphere.  I am assembling a rubber sphere, which is configured like a ‘beach ball.’   This will be used to assemble masonry spheres below ground, for water storage tanks, septic tanks, and other similar applications; around 8 feet in diameter.  For this use, the sphere will be inflated to a relatively low pressure (~20 psi) and will support block as they are laid.  Once the sphere is complete, the inflatable bladder is deflated and removed.  It is incredible (to me, at least) how much weight a relatively low air pressure can support.  25 psi can hold up tons of block!
Although my test sphere will be relatively small, it will be scale-able.  If the proportions remain intact, then a much larger sphere can be made using the same approach.  As discussed earlier, Galileo tried to impose his square cube law on masonry structures, and he was WRONG, the ancient masons had it right:  scale-ability is one of the defining features of masonry design.  The same system used to build an 8 foot diameter sphere can also be used to build an 80 foot (or 800 foot!) diameter sphere.



Other dome manufacturers use inflatable bladders for their systems; notably Monolithic Domes, as I discussed earlier, here.  Their use is for spraying shotcrete though, not for support and assembly of masonry construction.

As I use my inflatable bladder for masonry scaffolding I’ll post updates and pictures on this blog.  In the past I’ve used wooden scaffolding, I expect this to be much, much easier, faster, safer and cheaper.

9 comments:

  1. Really appreciate this post. It’s hard to sort the good from the bad sometimes, but I think you’ve nailed it!
    pvc welder

    ReplyDelete
  2. yeah I just love your site, it’s filled with fresh and relevant articles and have a very nice eye catchy design! Some posts really helped me in my work, so thanks for that!!

    ReplyDelete
  3. Just want to say your article is stunning. The lucidity in your post is simply striking and i can assume you are an expert on this subject. Well with your permission allow me to grab your rss feed to keep up to date with incoming post. Thanks a million and please keep up the delightful work Furniture Manufacturer in India

    ReplyDelete
  4. html - lehenga saree
    Your article is simple and artistic conception, like your writing style, I hope the next time I will have an opportunity to…

    ReplyDelete
  5. Hi, This is a good post, indeed a great job. You must have done good research for the work, i appreciate your efforts.. Looking for more updates from your side. Thanks Stock Tips

    ReplyDelete
  6. This would be a wonderful way to build straw bale catenary vaults!

    ReplyDelete
  7. What a site yaar? Really different and stuff work. I am your new visitor to your site. So I feel happy to be here. Now only I have got a wonderful site through Google to gather more information. I am stay tuned here for your next blog.
    thepriselive

    ReplyDelete
  8. This comment has been removed by the author.

    ReplyDelete
  9. This comment has been removed by the author.

    ReplyDelete