Tuesday, October 14, 2014

3D Printing and Masonry: a Brave New World of Construction

Three dimensional printing, or 3D printing, has come a long way over the past decade or so.  This technology is growing rapidly, and holds the possibility of disrupting many conventional technologies and entire industries.  One of the conventional construction technologies facing competition from 3D printing is masonry.  Will 3D printing eventually phase out traditional masonry construction?  What are the relative benefits of each technology: masonry versus 3D printing?  How soon will the masonry industry be impacted by 3D printing?



Recent developments in the field of 3D printing include the use of concrete and concrete-like material to create objects.  These objects include both masonry-like units which are subsequently assembled into an integrated structure and also the monolithic entire structure itself, “assembled” as a whole 3D printed object.  At the forefront of this technological breakthrough are 3D printing methods such as those under development by BehrokhKhoshnevis, professor of Industrial & Systems Engineering and Civil & Environmental Engineering and Director of the Center for Rapid Automated Fabrication Technologies (CRAFT) at the University of Southern California.  Khoshnevis refers to this technology being applied to print entire buildings as “Contour Crafting.”  He and others in the field speak of very high-strength 3D printed concrete materials as being just on the horizon; material with a compressive strength of around 10,000 psi.  Currently manufactured concrete block has a minimal compressive strength of around 3,000 psi, although high-performance concretes (HPC’s) are currently available with strengths up to around 20,000 psi and higher.

The advantages of 3D printed concrete –as compared to conventional concrete- include: fairly rapid construction, the ability to make complex shapes and forms, freedom from the constraints of molding, and potentially very high strength.  These benefits may also eventually include the ability to 3D print very detailed and intricate structural features integrated into the building; including ventilation, plumbing, wiring, etc.  Other developers in the 3D printed structures include the principals of “Emerging Objects”, Ronald Rael (at University of California Berkeley) and Virginia SanFratello (at San Jose State).  Their work includes hollow, interlocking masonry like units which assemble in a manner similar to topological interlocking structures (as discussed earlier on this blog).  It holds the promise of potentially creating structural configurations suitable for seismic areas and the ability to withstand major earthquakes.

Still others are 3D printing entire homes, and appear to be close to commercialization.  Among these is a Chinese company, whose equipment is said to be capable of producing ten houses in one day.  It should be noted that these houses are not printed as a whole; they are printed in panels and these panels are then assembled.  There is also a Dutch company, Dus Architects, whose equipment is also capable of printing ‘chunks’ of house, which then must be assembled into a home.



The advantages of 3D printing should appear as obvious, namely: the ability to create virtually any shape, without the limitations imposed by a block machine, or undercuts, or draft angles; the relatively rapid pace of fabrication; a choice of materials (including plastics, concrete, and composites); and the ease of producing an object from a 3D computer file.  It would seem that the 3D printing of homes is inevitable, and that masonry will soon become a lost art - and go the way of film photography, which has been replaced by digital photography.



A few critical factors appear as though masonry will remain in the construction industry for the foreseeable future.   First of all, buildings must begin with a foundation.  In climates with freezing winters the foundation must be placed 3 or four feet below grade, or below the extent of the frost line on the coldest days.  This is simply not possible with the state-of-the-art in 3D printing technology available now.  3D printing technology cannot create a foundation below grade, although it is likely to overcome this obstacle in the future.  Secondly, most 3D printing technologies simply produce panels, or pieces or chunks of a structure which must then be assembled; this basically describes masonry, and is not an improvement over masonry per se.   Those 3D printers which are capable of producing an entire integrated, complete finished structure require an extensive working platform on which to operate.  This platform requires extensive, expensive, detailed site preparation for the 3D printer; this negates many of the so-called benefits of 3D printing an entire structure (more expensive, difficult, and time consuming).  Another major impediment to 3D printing is the fact that the construction industry is an extremely conservative industry and is very slow to accept new technologies.  This fact is made more relevant by the fickle nature of the construction consumer: people want houses, homes and buildings to look like they’ve always looked.  The 3D printing approach to providing homes still has a very long way to go before it produces houses that look very much like every house produced everywhere.  This is not an arena for brave new ideas: homeowners want their homes to look like their neighbors’.  “Fitting in” in the aesthetic sense is probably much more important than efficiency, strength, environmental concerns, longevity, or any other factor about construction.  The appearance of the finished product cannot be overemphasized, and 3D printing has a long way to go here.  Finally, and perhaps most importantly, is the factor of cost.  While 3D printer advocates say that they are faster and less expensive than masonry, it is instructive to note that the concrete block manufacturing industry has developed to a state of high efficiency and economy.  An 8 inch x 8 inch x 16 inch rectangular concrete block is produced in around 2 seconds, and typically costs around $1.00 or so.  This is the benchmark to beat, and 3D printing is not anywhere close to this, despite the claims being made.  It appears as though concrete block will probably be around for a while yet.



3D printing holds great promise for the future of construction.  Those who assume that it will never affect their industry (designers, builders, blockmakers, masons, etc.) do so at their own extreme risk; they are likely to go the way of film photography, i.e., extinction.  Instead, it appears inevitable that 3D printing will have a huge transformative effect on construction in general and on masonry in particular.  It seems that masonry will –in all likelihood- always exist, but that it will be fundamentally transformed by 3D printing.  Masons can design their work and have custom blocks produced on-site, instantly and inexpensively.  Brunelleschi would have put 3D printing of masonry to spectacular use; he wouldn’t have had to carve shapes from turnips to show his masons how he wanted block made.  They would be made instantly, exactly as he envisioned them.  It seems that 3D printing could well add to the art, science and craft of masonry in the relatively near future.

21 comments:

  1. I think it is cool to take a general overlook at masonry and all it does to help the community. Without masonry, we wouldn't have such strong foundations in homes and other things like that. I hope that 3D printing continues to be researched as well, since I also think it could be very helpful to the future of masonry. http://www.mblandscape.com/masonry-stone-pavers-new-york-rockland-county.html

    ReplyDelete
  2. I never really got into masonry. I did always think that it was pretty cool on what kind of things you can make with masonry. I am starting a project at home where I think that I will be needing to hire a masonry contractor here in Kelowna. I think that there is one around where I live. http://www.mweissmasonryinc.ca/en/

    ReplyDelete
  3. 3D printing is the future of manufacturing. Everything from food to home is 3D printed with great precision. It not only saves time, but material as well. Walls are so smooth that it doesn’t require any masonry work. I guess it’s going to mar concrete and masonry contractors’ business.

    ReplyDelete
    Replies
    1. It's an interesting situation Bob, because the construction industry is traditionally extremely conservative and slow to accept new ideas. I think the adaptation of 3D printing by the construction industry will occur slower than 3D printing's abilities will be realized. Masonry companies must adapt eventually, or perish. I expect that eventually hand-crafted masonry will become a specialty market, but not for at least ten, maybe twenty years. Thnaks for your comment.

      Delete
  4. Now a days, masonry work for construction is getting a new look. Loved it. Thank you for the post. Its a great experience to read this. I think http://nypavingandmasonry.com/ will be found to be useful.

    ReplyDelete
  5. We never know what the future will hold. 3D printing could impact masonry significantly, but it also could take an entire new direction. Masons might have to adapt, but really, we are not sure how 3D printing will be in 5 or 10 years. http://www.mweissmasonryinc.ca/en/

    ReplyDelete
  6. I like all details that you provide in your articles. eddm mailer printing

    ReplyDelete
  7. Here i had read the content you had posted. It is much interesting so please keep update like this.

    3D printing service in Coimbatore

    3D printing in Chennai

    ReplyDelete
  8. Interesting and amazing how your post is! It Is Useful and helpful for me That I like it very much, and I am looking forward to Hearing from your next.. www.littlerockbrickmason.com

    ReplyDelete
  9. Thanks for a very interesting blog. What else may I get that kind of info written in such a perfect approach? I’ve a undertaking that I am simply now operating on, and I have been at the look out for such info. 3dmodelmania.com

    ReplyDelete
  10. Pretty nice post. I just stumbled upon your weblog and wanted to say that I have really enjoyed browsing your blog posts. After all I’ll be subscribing to your feed and I hope you write again soon! Markforged 3D Printers

    ReplyDelete
  11. Thanks For sharing this Superb article.I use this Article to show my assignment in college.it is useful For me Great Work. 3dmodelmania.com

    ReplyDelete
  12. Very efficiently written information. It will be beneficial to anybody who utilizes it, including me. Keep up the good work. For sure i will check out more posts. This site seems to get a good amount of visitors. 3d models for cnc

    ReplyDelete
  13. Amazing Guys, Here I want to share this amazing font with you. That really help in several designs;

    Royalty Free Fonts

    ReplyDelete
  14. Excellent Post! For more information Visit Here.photocopy machine

    ReplyDelete
  15. I am the owner of a manufacturing business. I use a 3D laser scanning service to design my products. Designing products using 3D laser scanning service is convenient and reliable. If you need the best 3D laser scanning service then you can contact Onsite3D. 3D laser scanner Calgary, Alberta

    ReplyDelete
  16. Don't mix mortar in large batches unless you are willing to use it all in one application. More than one do-it-yourslf bricklayer has ended up with a wheelbarrow filled with 200 lbs of dried mortar for this reason. bricklaying tool box

    ReplyDelete
  17. I like your post. It is good to see you verbalize from the heart and clarity on this important subject can be easily observed... DTF printer ink

    ReplyDelete
  18. Keps med tryck Wow, cool post. I'd like to write like this too - taking time and real hard work to make a great article... but I put things off too much and never seem to get started. Thanks though.

    ReplyDelete
  19. CD Screen printing is ideal for artwork designs that involve solid areas of colour. Screen printing is carried out using a machine with a rotating bed that has 5 separate stations where a different colour of ink can be applied. 3dm8 website

    ReplyDelete
  20. Individual DTF Transfers streamline personal finance, offering tailored solutions for seamless and secure money management, adapting to individual needs.

    ReplyDelete